|
Positioning Technology:
Positioning Systems and Linear Positioning Systems
Due to the wide variety of different models and
options, positioning units from halstrup-walcher are eminently suitable for
use in machinery and plant construction (packing lines, filling units,
printing equipment, wood-processing equipment, metering pumps, valve
control) and in medical technology and the pharmaceutical industry.
|
 |
|
PSE 30_-8
Positioning system with controller, gear with a
electronically commutated DC motor (brushless) and absolute measuring
system. Machines and stops are reset automatically within minutes, which
eliminates rejects due to operator error and significantly reduces
downtimes. Iinterface CANopen/DS 301, Profibus, Device Net
|
|
PSE 30_/32_-14
Positioning system with controller, gear with a
electronically commutated DC motor (brushless) and absolute measuring
system. Machines and stops are reset automatically within minutes, which
eliminates rejects due to operator error and significantly reduces
downtimes. Iinterface CAN-Bus/DS 301, Profibus, Device Net
|
|
PSE 31_-8
Positioning system with controller, gear with a
electronically commutated DC motor (brushless) and absolute measuring
system. Machines and stops are reset automatically within minutes, which
eliminates rejects due to operator error and significantly reduces
downtimes. CAN bus data interface.
|
|
PSE 36_-8
Positioning system in stainless steel housing, horizontal
construction, IP 68 protection class, with controller, gear, DC motor
(brushless) and absolute measuring system. Simple hollow shaft mounting, no
reference runs required, integrated position control, resistant to
obstructions, hand brake for raising the holding torque, data interface =
CAN-Bus/DS301, Profibus DP, Device Net.
|
|
|
PSE 36_/38_-14
Positioning system in stainless steel housing, horizontal
construction, IP 68 protection class, with controller, gear, DC motor
(brushless) and absolute measuring system. Simple hollow shaft mounting, no
reference runs required, integrated position control, resistant to
obstructions, hand brake for raising the holding torque, data interface =
CAN-Bus/DS301, Profibus DP, DeviceNet.
|
|
PSE 37_-8
Positioning system in stainless steel housing,
longitudinal construction, IP 68 protection class, with controller, gear, DC
motor (brushless) and absolute measuring system. Simple hollow shaft
mounting, no reference runs required, integrated position control, resistant
to obstructions, hand brake for raising the holding torque, data interface =
CAN-Bus/DS301, Profibus DP, Device Net.
|
|
PSE 37_/39_-14
Positioning system in stainless steel housing,
longitudinal construction, IP 68 protection class, with controller, gear, DC
motor (brushless) and absolute measuring system. Simple hollow shaft
mounting, no reference runs required, integrated position control, resistant
to obstructions, hand brake for raising the holding torque, data interface =
CAN-Bus/DS301, Profibus DP, DeviceNet.
|
|
PSE 34_-14
Positioning system with controller, gear, DC motor
(brushless) and absolute measuring system. Simple hollow shaft mounting,
manually operated possible, no reference runs required, integrated position
control, resistant to obstructions, hand brake for raising the holding
torque, joy key operation, data interface = CAN-Bus/DS301, Profibus DP,
Device Net.
|
|
|
PSE 42_
Positioning system with control unit, stepping motor,
gear and absolute measurement system. Automatic re-fitting within minutes,
no wastage as a result of operating errors, considerable reduction of
downtimes.
|
|
PSE 43_
Positioning system with control unit, motor, gear and
absolute measurement system. Automatic re-fitting within minutes, no wastage
as a result of operating errors, considerable reduction of downtimes.
|
|
PSE 200
Actuator and position control loop for the positioning of
rotating machine parts.
|
|
PSE 272
Positioning system. Complete unit consisting of actuator
and position control loop. Simple set-point value, can be connected directly
to SPC. Control range up to 20 revolutions. Protection class IP 65.
|
|
|
PSE 100
Positioning system with torque of up to 10 Nm, consisting
of actuator and position control loop for the positioning of rotating
machine parts.
|
|
PSE 172
Positioning system. Complete unit consisting of actuator
and position control loop. Simple set-point value, can be connected directly
to SPC. Control range up to 20 revolutions. Protection class IP 65.
|
|
LPE 72
Linear positioning system. Complete unit consisting of
spindle drive and position control loop. Simple set-point value, can be
connected directly to SPC, high control speed, protection class IP 64.
|
|
LPE 4310 C
The LPE 4310 C linear positioning system with stepping
motor, controller, gear and absolute measuring system. Very high degree of
positioning accuracy. Automatic changing over within minutes, elimination of
rejects due to operator error and a significant reduction in downtimes. CAN
bus interface.
|
|
|
Drive Technology:
Actuators, Spur Gear and Linear Drives
Due to the wide variety of different models and
options, gears from halstrup-walcher are eminently suitable for use in
building installations (e.g. for ventilation, exhaust air and flue gas
dampers, for valves, window openers), in medical technology (e.g. for
dialysis pumps, X-ray equipment, recorders for ECG/EEG equipment), for
optical and electronic equipment (e.g. for scanners, measuring systems for
ticket and card readers), in machinery and plant construction (ink zone
adjustment, limit-stop control, vending machines, metering pumps, filler
units).
|
|
|
ST 120 KG
Gear unit with synchronous or DC motor, limit on the
angle of rotation and positional feedback via potentiometer.
|
|
N 40 V
Spur gear. Plate gear with low gear backlash, carbonised
and mounted in a slide bearing output shaft (also fitted with ball bearings
as an option).
|
|
N64 V 30
Spur gear. Plate gear with low gear backlash, carbonised
and mounted in a slide bearing output shaft (also fitted with ball bearings
as an option).
|
|
N 72
Spur wheel, compact design with a variety of
transmissions, can be used with motors from various manufacturers.
|
|
|
N 100
Spur gear, plate gear with low gear backlash, carbonised
and mounted in a slide bearing output shaft (also fitted with ball bearings
as an option).
|
|
LA 68
Linear drive. Drive with selection of different lifting
speeds. Length of stroke is limited by position switches.
|
|
LA 80
Linear drive unit with selection of different lifting
speeds. The length of stroke is limited by position switches.
|
|
LA 120
Linear drive unit with selection of different lifting
speeds. The length of stroke is limited by position switches.
|
|
|
Pressure Measuring Technology:
Differential Pressure Transducer, Digital Manometer, Calibration Equipment
and Absolute Pressure Transducer
Differential-pressure transducers and calibration
equipment for air and non-aggressive gases.
Due to the wide variety of different models and options,
differential-pressure transducers and calibration equipment from
halstrup-walcher are eminently suitable for use in ventilation and
air-conditioning technology, for filter control, in clean rooms and medical
technology, in mechanical engineering and as service equipment for assembly
and maintenance work.
The pressure transducer and calibration equipment are available with
calibration record or DKD certificate.
|
|
|
PUC 24
Process monitoring device for clean rooms. Room pressure
measurement with inputs for humidity and temperature sensors. Measured
values are sent to the control module via a Profibus interface.
|
|
P 26
Differential pressure transducer; freely scalable within
a range of ± 10 Pa to ±100 kPa; automatic zero-point calibration provides
excellent reproducibility and precision; optional RS 232 C interface;
configurator available as an accessory.
|
|
P82 R
Measuring transducer with square root-extracted output
characteristic, which is thus suitable for the direct measurement of the
volumetric flow rate via measuring orifice, concentric nozzle, flow grid,
etc.
|
|
PU/PI
Measuring transducer with high precision and long-term
stability for measuring the pressure in air-conditioning and ventilation
units, for monitoring filling levels and for filter control, etc.
|
|
|
PUE 94
Measuring transducer with high overload capacity for
measurements that could be impaired by pressure fluctuations.
|
|
PIZ
Measuring transducer with two-conductor system 10 - 32 V,
with high precision and long-term stability for measuring the pressure in
air-conditioning and ventilation units, for monitoring filling levels and
for filter control.
|
|
PS 10
Measuring transducer preferably used as built-in device
in air-conditioning and ventilation technology.
|
|
PK 15
Measuring transducer with analog output for applications
requiring an optional or acoustic signal as warning message.
|
|
|
PS 18
Low-cost measuring transducer for simple tasks in
air-conditioning and ventilation technology with high sensitivity and very
good long-term stability.
|
|
PS 27
Differential pressure transducer for simple
air-conditioning and ventilation applications, highly sensitivity, excellent
long-term stability, suitable for mounting on top-hat rails.
|
|
REG 21
Pressure controller, design in panel housing with large,
bright LE-Display, with 2 adjustable relay outputs, which allows to realize
a 2 or 3 step controller. In addition to the relay output there is an
analogue output.
|
|
EMA 200
Portable, battery-powered, digital pressure gauge for
assembly and maintenance tasks performed by service technicians in the
heating, air-conditioning and ventilation industries. For measuring
fireplace drafts, volume flow, etc., and for monitoring filters, etc.
Measurement ranges up to 0 - 200 kPa.
|
|
|
EMA 84
Portable, battery-operated measuring device for assembly
and maintenance work in customer services for heating, air-conditioning and
ventilation units, for measuring the chimney draught, the wind pressure, for
filter control, for laboratory work, etc. Measuring range up to 100 kPa.
|
|
KAL 100
Portable, calibration device. A combination of pressure
transducer and pressure gauge. The desired pressure is displayed digitally.
Connection to an external air compressor is unnecessary.
|
|
KAL 200
Portable calibration device with integrated pressure
generator. Combination pressure transducer and pressure gauge. The desired
pressure is set by digital input. No need to connect to an external pressure
generator.
|
|
KAL 84
In the case of a variable volume, a hand pump (optional)
can also be connected. Use in accordance with the Medical Devices Directive,
Measurement Control.
|
|
|
AD 1000
Absolute pressure transducer is suitable for measuring or
controlling air pressure or absolute pressure.
|
|
BA 1000
Electronic barometer is suitable for displaying the
barometric air pressure.
|
|
BA 90
Digital manometer is suitable for installation in control
panels to display the barometric air pressure.
|
|
|
C 
